New climate regulations and re-use of precast concrete elements

ReCreate-blog-post-1.png

Tove Malmqvist Stigell, Senior Researcher and Docent, KTH Royal Institute of Technology 

A transition towards a more circular economy is currently lined up by multiple ongoing policy processes, not least within the EU Green Deal. One novel regulatory development already in effect in a few European countries is mandatory climate declarations and limit values on GHG emissions for buildings. What are these regulations and how do they connect to the re-use of precast concrete elements?

After several decades of development of LCA (Life cycle assessment) methodology for buildings aiming at guiding low-impact design in a life cycle perspective, a raised interest for building LCA has been seen during the latest years. Not least insights on the significance of embodied greenhouse gas emissions in buildings, has led to LCA-based regulations being introduced in several European countries. These require mandatory climate declarations of, so far primarily, new-build projects, and some of them also require building projects to display emissions below a set limit value. Such a climate declaration is a quantitative assessment of life-cycle related greenhouse gas emissions (GHG) of the building that the developer has to perform and hand in to the authority. Countries such as France, Sweden, Denmark and Norway already have such regulations in effect since 2022-2023. In France and Denmark limit values for these emissions are part of the regulation. Such limit values are represented by a set number of kg CO2-equivalents per floor area or per floor area and year, which can be tightened over the years to support further GHG emission reduction. Such limit values are also planned to be introduced in the coming years in Sweden and Finland. The Netherlands introduced a more comprehensive LCA-based declaration with limit value already in 2017. At EU level, the recast of the EPBD (Energy performance of buildings directive) requires a mandatory climate declaration for new-build from 2027 for buildings over 2000 m2 and from 2030 for all buildings, and similarly the EU taxonomy stipulates such a declaration from 2023 for buildings over 5000 m2. 

In the light of this type of regulatory development, the interest for developing methods to implement re-use of building components in new-build has increased much. The reason for this is that reuse of components could be one, among other strategies, to ensure low-carbon designs and to comply with tougher limit values in similar regulations. This since re-used components in general have lower environmental impact than virgin ones. To incentivize such strategies further, the Swedish regulation, as an example, makes it possible for a developer to use re-used products “for free”, that is count them as zero impact in the stipulated climate declaration. When setting up the mandatory climate declaration, the Swedish regulation requires a developer to make us of generic data from the national climate data base of Boverket unless EPD´s (environmental product declaration) exist and are used (and also verified that these products were procured to the building at stake). Reused construction products in Boverkets database are however currently allocated zero GHG emissions, thus incentivizing reused products in new building design This is naturally a simplification for to create an incentive, but since EPD´s on re-used building components are still extremely rare it would in the current situation not benefit re-use of precast concrete elements to require more detailed information on e.g the emissions of the reconditioning processes. Meanwhile, this type of information is currently built up in the ReCreate project based on the demonstrators in the project. 

A central issue of significance in the design of building LCA studies, including the method of LCA-based regulations, is the coverage of processes, that is the system boundaries for the assessments. It is often necessary to omit certain processes due to lack of data or to focus the assessments on known hot-spots. When these types of assessments now enter regulation, different countries take slightly different approaches to the choice of system boundaries which has led to discussions regarding how they then incentivize, or not,  certain low-carbon strategies such as circular solutions. For example, the Swedish regulation focus the production and construction stage impacts, that is the embodied GHG emissions of modules A1-A5, according to the European standard EN 15978. In a life cycle perspective, these emissions constitute a significant, and earlier non-regulated, hot-spot. These emissions can also be verified by the completion of a building project, compared to emissions associated with the use and end-of-life stages of buildings. Principally, one could argue that such a more narrow system boundary increase the incentives for re-use of precast concrete elements since the emissions of modules A1-A5 in contemporary construction of buildings are much dominated by the materials of the structure. If implementing more of a whole-life system boundary, as for example is planned for in Finland, the proportional impact of modules A1-A5 will be less, which might reduce the incentivizing effect of re-using building components. 

A well-known obstacle to reuse today is the difficulty, and thus the high costs, of dismantling buildings for reuse of elements and components with a viable service life left. This is a question that often comes up in connection to building LCA, with the idea that including the end-of-life (module C) and benefits and loads beyond the system boundary (module D) in the assessment system boundary would incentivize measures taken for design for re-use, including design for disassembly (DfD). However, end-of-life emissions associated with pre-cast concrete elements are much lower compared to emissions associated with the production stages (modules A1-A3) of contemporary construction in the European context, and it may thus be questioned to what extent it´s inclusion could have an incentivizing effect.  

An aim with module D is to give room for displaying future potential benefits in form of emission savings due to e.g reuse of components in new constructions, to be reported separately according to the EN 15978 standard. It should be noted that module D highlights potential future savings, the extent of which depend on the future handling of the components, which is hard to predict. The prospects for future re-use improve with DfD implemented, but the calculation of module D is not linked to whether such design strategies were implemented or not. Finally, one needs to remember that both module C and D deals with assessment of potential emissions in a distant future, thus their assessment becomes very uncertain. Normally, these assessments reflect today´s technology, but an increasing number of voices promote that decarbonization scenarios should be applied in similar long-term assessments. If so, the significance of module C and D also decrease. 

The proposed Finnish regulation is an example of a more comprehensive system boundary. It for example introduces thecarbon handprint which more or less reflect an assessment of module D to, in quantitative terms, visualize potential future benefits of re-using the components of the studied building along with other potential benefits of implemented design strategies

So to sum up, the emerging climate declaration regulations in various European countries do create new incentives to apply re-use of prefabricated concrete elements in today´s new-build. However, to for increased implementation of DfD strategies in today´s new-build for improving prospects for future re-use, these types of regulation do not provide direct and clear incentives. Instead, complementary steering mechanisms might be needed to promote DfD strategies

Resources: 

Boverket climate database in Sweden: https://www.boverket.se/sv/klimatdeklaration/klimatdatabas/  

Finnish emissions database for construction: https://co2data.fi/rakentaminen/#en   

Example of proposed ongoing regulatory development: the next steps proposed for the Swedish climate declaration regulation: https://www.boverket.se/en/start/publications/publications/2023/limit-values-for-climate-impact-from-buildings/#:~:text=Limit%20values%20can%20be%20introduced,on%20climate%20declarations%20for%20buildings  

ReCreate project




EU FUNDING

“This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 958200”.

Follow us: